Shaft Retention Collar
Size Chart BUY NOWWe have all heard horror stories of boats sinking when a coupling breaks and the shaft is ripped out of the boat. PSS Seal has a simple solution to assist in keeping the shaft in the boat. The Shaft Retention Collar is designed to help retain the propeller or rudder shaft in your vessel in the event of catastrophic failure of the coupling or if the shaft comes free from the coupling.
Each collar includes:
- 314 stainless steel clamp
- 3/8" x 24 thread bolts - 2qty
OPTIMAL STRENGTH
The double split design provides the maximum in axial holding power with the benefit of quick and efficient assembly with the shaft installed.
EASY INSTALLATION
Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard and soft shafts. Very simple to retrofit to existing prop shafts and rudder shafts. A cost effective and quick solution that could save thousands.
Dimensions
| Shaft Diameter | Outside Diameter | Collar Width | Part Number |
|---|---|---|---|
| 3/4" | 1-1/2" | 1/2" | 07-SRC-034 |
| 1" | 1-3/4" | 1/2" | 07-SRC-100 |
| 1-1/8" | 1-7/8" | 1/2" | 07-SRC-118 |
| 1-1/4" | 2-1/16" | 1/2" | 07-SRC-114 |
| 1-3/8" | 2-1/4" | 9/16" | 07-SRC-138 |
| 1-1/2" | 2-3/8" | 9/16" | 07-SRC-112 |
| 1-3/4" | 2-3/4" | 11/16" | 07-SRC-134 |
| 2" | 3" | 11/16 | 07-SRC-200 |
| 2-1/4" | 3-1/4" | 3/4" | 07-SRC-214 |
| 2-1/2" | 3-3/4" | 3/4" | 07-SRC-212 |
| 2-3/4" | 4" | 7/8" | 07-SRC-234 |
| 3" | 4-1/4" | 7/8" | 07-SRC-300 |
| 3-1/4" | 4-5/8" | 7/8" | 07-SRC-314 |
| 3-1/2" | 4-5/8" | 7/8" | 07-SRC-312 |
| 3-3/4" | 4-7/8" | 7/8" | 07-SRC-334 |
| Shaft Diameter | Outside Diameter | Collar Width | Part Number |
|---|---|---|---|
| 25mm | 45mm | 15mm | 07-SRC-25M |
| 30mm | 54mm | 15mm | 07-SRC-30M |
| 35mm | 57mm | 15mm | 07-SRC-35M |
| 40mm | 60mm | 15mm | 07-SRC-40M |
| 45mm | 73mm | 19mm | 07-SRC-45M |
| 50mm | 78mm | 19mm | 07-SRC-50M |
| 55mm | 82mm | 19mm | 07-SRC-55M |
| 60mm | 88mm | 19mm | 07-SRC-60M |
| 65mm | 93mm | 19mm | 07-SRC-65M |
| 70mm | 98mm | 19mm | 07-SRC-70M |
| 75mm | 103mm | 19mm | 07-SRC-75M |
| 80mm | 108mm | 19mm | 07-SRC-80M |
| 85mm | 118mm | 23mm | 07-SRC-85M |
| 90mm | 121mm | 23mm | 07-SRC-90M |
| 95mm | 137mm | 23mm | 07-SRC-95M |